Product Overview
One for one OEM drop in rear sight, gen1 & 2 pistols and all carbines.
- 1.5mm Red or Green Fiber Optic dots
- 3D printed out of PLA plus
- Pistol Install: Simply remove the rear sight (2 screws careful not to lose the spring). Unscrew the windage screw and replace the OEM rear sight with your new JSARMSCO.com fiber optic rear sight. Carefully inserting the spring under the rear sight assembly and replace the two screws. The front one hold the assembly in place the second one adjusts the rear sight up and down.
- Carbine Install: Cut the post on the peep sight as close to the base as you can. loosen the screw that moves the sight up and down until the peep sight base will clear the rear sight guard. Unscrew the windage screw until the peep sight base comes out. Insert your new JSARMSCO.com fiber optic rear sight and screw in the windage screw until your sights line up. Tighten the up and down screw. you will need to sight your carbine in adjusing the screws until you are happy with shot placement.
