Product Description
One for one OEM drop in front sight and rear sight for all carbines with the OEM sights installed
- 1.5mm Red or Green Fiber Optic dot - Mix and match.
- Open slot design allows for optimum light to cause fiber optic to glow.
- 3D printed out of PLA plus with High Viz Fiber Optic
- DOES NOT COME WITH SIGHT MOUNTING BASE, you reuse the OEM ones you already have.
- Front Sight: Unscrew the screw until the front sight post comes out. Insert your new JSARMSCO.com fiber optic front post screw in the screw until tight. You will need to sight your carbine in adjusting the screw until you are happy with shot placement.
- Rear Sight: Cut the post on the peep sight as close to the base as you can. loosen the screw that moves the sight up and down until the peep sight base will clear the rear sight guard. Unscrew the windage screw until the peep sight base comes out. Insert your new JSARMSCO.com fiber optic rear sight and screw in the windage screw until your sights line up. Tighten the up and down screw. you will need to sight your carbine in adjusting the screws until you are happy with shot placement.
